1. Feature:
Reci upgrades and brings CO2 glass laser tube to 3.0 generation. Through the last ten years of development, the CO2 glass laser tube now develops to the third generation. The third generation of laser tube cancels the adjusting screws at both tube ends. Instead, the metal parts are made by high-precise CNC machine. New firing technology is used to join metal parts and glass parts together directly. This new technology makes the high stability in W series laser tubes.
2. Product characteristics:
2.1 Beam quality: >95% TEM00 mode
2.2 Optical resonator advantage: enhance power
2.3 Advanced radioactive materials coated lenses
2.4 Alternative technique: metal-glass sintering
3. Technical Parmeters
4. Cleaning Tips: When cleaning the window of carbon dioxide laser tube, please do not use cotton swabs or other wipes as they will significantly affect out power.
The following methods are provided for cleaning the window:
4.1 When the lens is stained, turn off the laser tube.
4.2 Use an air dust blower to blow away dust and dirt on the lens.
4.3 Use a syringe to spray ethanol on the lens.
4.4 After the ethanol evaporates, turn the laser tube back on.
4.5 If the above method do not work effectively, professionals are required, who will use a cotton swab dipped in ethanol to clean the lens in a rotating fashion away from the center, outwards to the edge.
5. Special Notice:
5.1 Do not use acetone to clean the glass.
5.2 Do not move the two fastening screws on both ends of laser tube. Otherwise, the output power will decrease, and the laser tube will be scraped.
5.3 When testing the light spot on organic glass, please keep the organic glass 300mm away from the window.
6. Safety:
At the CO2 glass laser device generates invisible light, please wear eye protection gear when operating. A safety sign for high voltage is marked on the positive pole.
7. Storage and Transportation Requirement:
When storing and transporting the co2 laser tube, please drain the cooling liquid and cover the tubes ends with dustproof plastic bags. For storage, the required environmental temperature is 2-40 ºC and the humidity range from 10-60%.
Adhesive tapes and sponges should be used to fix the laser tubes and prevent sliding during transport. A 70mm sponge should be use at the end of the window, and a 50mm sponge should be at the end of the reflecting mirror fully.
8. Related Laser Machine Parts
8.1 Power Supply
8.2 Focus Lens
8.3 Reflective Mirrors
9. Contact Information
To be continued..